Quality Control in Continuous Operation

CoatingVisons

Quality Control in Continuous Operation

Searching for a UV solution „that lasts“, the electronics protection service provider comes across DIANA on the Internet. „Finally someone who took the time to develop a customized solution for us,“ remembers Coating Visions Managing Director Tobias Grimm. Already for a long time, the company from Rottweil was looking after a UV solution to do the quality inspection of protective coatings and lacquers, which can withstand a 40-hour per week continuous operation.

Coating Visions: The electronic protection specialist from Rottweil convinces in coating.

Coating Visions specializes in protective lacquering, coating and potting of electronic components. Wherever electronics must withstand strong environmental influences, such as in the automotive or pharmaceutical industries, these protective measures indispensable. By applying a protective layer, the printed circuit boards are shielded from moisture, mechanical stress, vibrations, dirt, harmful gases, salt mist or acids. The result: Increased quality, extended service life and higher reliability.

From production to packaging: Quality control with UV light during the entire process.

Coating Visions subjects all production steps from coating line to shipping to a visual inspection. Since the used coating material contains a fluorescent UV trace, the quality of the protective layer can be optimally checked by an UV light with a wavelength of 365 nm. „In the past, we have used a wide variety of lamps – from very inexpensive to highly expensive,“ reports Managing Director Tobias Grimm. „The problem was the same for all of them: the lights were defective within a few weeks or had severe losses of luminosity. We simply could not find any UV light sources that were designed for a working day with several hours of continuous operation.

Wanted: Glare-free, robust, solvent-resistant and durable UV light!

Stanislaw Held, Production Manager at Coating Visions, came across DIANA lights while surfing the Internet. The first contact was quickly established and an appointment was made.

„The handling of our inquiry was highly professional. DIANA looked after us perfectly and took the time to get to know our company in order to develop a lighting solution customized to our needs,“ remembers Tobias Grimm. „The requirement profile corresponded exactly to our P64 task light - but with UV LEDs,“ explains Valentina Ester, DIANA‘s Sales Manager. „The light had never been equipped with UV LEDs before, but with the experience gained from countless UV projects we quickly knew that there will be no problems with this type of light switching to UV LEDs“. No sooner said than done: The first sample light was built, tested and found to be good.

Since then, the UV lights from DIANA have been in continuous use. According to managing director Tobias Grimm, it is „definitely the best lighting solution we have ever had in our house! Only with optimally equipped workplaces our employees can achieve perfect production results! By the longer life span also the higher costs relativize themselves in the comparison to the so far used competitive products from different online shops!“

UV task light in action
The protective coating of printed circuit boards only becomes visible under the UV light of the workplace lighting.
The Task Light P64 UV convinces during visual quality control with excellent light quality and a long life!
Grade A
Tobias Grimm, Managing Director of Coating Visions, about the cooperation with DIANA

Even good solutions can be even better!

„At workplaces that require permanent UV lighting, increased exposure to solvent vapors usually occurs.

This usually does not please the LEDs and has a negative effect on their service life. That‘s why we monitor the lights used at Coating Visions very closely,“ explains Martin Weller, Head of Research and Development at DIANA. „The next generation of the P64 UV is already underway and will further optimize durability!“

„It is important to us not just to sell a light. You have to understand the area of application in detail in order to find an optimal solution for the customer“. says Valentina Ester. „We can choose from a wide range of standardized components and modules. This enables us to make individual adjustments even with relatively small quantities and to find a solution that is still economically viable“.

Further information about Coating Visions GmbH & Co. KG and the protection of electronic assemblies is available at (link: www.coatingvisions.de text: coatingvisions.de).

We inform you about UV-LED lighting solutions at (link: /individuelle-led-loesungen/uv-prozessleuchten text: UV process lights).

Retrofit CL55 – The perfect tunnellight

AGMI Traffic & Lighting

Retrofit CL55 – The perfect tunnellight

Individual LED retrofit

Bicycle tunnels have been an integral part of the mobility network in the Netherlands for decades. This is also the case in Zwolle. The pulsating Hanseatic city not only has a medieval city center, but also a busy bicycle tunnel. The tunnel lighting installed there ensures road safety for cyclists. But what should be done when the lighting no longer meets the technical requirements and safety is no longer guaranteed?

SmartLight: The Eye of the Refiner

VOITH

SmartLight: The Eye of the Refiner

Individual signal lights

Voith´s aim was nothing less than to achieve the “next generation in milling through” the development of the new InfibraFiners system. Eye-catcher, with its centerpiece the SmartLight IF90, was developed in a record-setting five months through the collaboration of the design company defortec and DIANA.

Completely new signaling solution

SYNTEGON

Completely new signaling solution

Individual Signal Lighting

An internal recommendation brought the team of Syntegon and DIANA together. „After the joint development of an individual sightglass light already had been successful, it was clear that we would also contact DIANA with our new idea,“ says Steffen Carbon, project manager at Syntegon. „In our modern machine design, we use a mineral material in which the signal light should also be completely integrated.“ A tricky challenge – just the right thing for DIANA.

Protecting life with technology!

Franz Ziel GmbH

Protecting life with technology!

Cleanroom lighting

A mutual customer brought FRANZ ZIEL GmbH together with DIANA Electronic-Systeme GmbH. The relatively simple requirement to illuminate the interior of an insulator in amber developed into an innovative RGBW LED solution in the Laminar Air Flow systems for product and personal protection. The D45 Multi-Color not only illuminates the working area, it also functions as a status indicator

Quality Control in Continuous Operation

Coating Visions

Quality Control in Continuous Operation

UVA Task Lighting

Searching for a UV solution „that lasts“, the electronics protection service provider comes across DIANA on the Internet. „Finally someone who took the time to develop a customized solution for us,“ remembers Coating Visions Managing Director Tobias Grimm. Already for a long time, the company from Rottweil was looking after a UV solution to do the quality inspection of protective coatings and lacquers, which can withstand a 40-hour per week continuous operation.